ANY-maze Help > The ANY-maze reference > The Protocol page > The elements of a protocol > Testing > Events and actions > Setting up an event > Event trigger wizard : Time interval

Event trigger wizard : Time interval

In this step, you need to specify how long after the event you specified in the previous step this event should trigger. For example, if you enter '60' then this event will be triggered 1 minute after the other event.

The value you enter can use any of the units d (days), h (hours), min (minutes), s (seconds), or ms (milliseconds). You can mix units and also specify decimal values. So, for example, the period of eight and a half minutes could be entered as '8.5min' or as '8min 30s'. If you don't specify any units, then seconds will be assumed.

You can enter any value from 50 milliseconds to 24 hours.

ANY-maze help topic T0425