ANY-maze Help > The ANY-maze reference > The Protocol page > The elements of a protocol > Testing > Events and actions > Setting up an event > Event trigger wizard : Time until test end

Event trigger wizard : Time until test end

In this step, you need to specify how long before the programmed end of the test the event should be triggered. For example, entering '120' would cause the event to trigger two minutes before the programmed end of the test.

The value you enter can use any of the units d (days), h (hours), min (minutes), s (seconds), or ms (milliseconds). You can mix units and also specify decimal values. So, for example, the period of eight and a half minutes could be entered as '8.5min' or as '8min 30s'. If you don't specify any units, then seconds will be assumed.

You can enter any value from 50 milliseconds to 24 hours.

ANY-maze help topic T0422