ANY-maze Help > The ANY-maze reference > The Protocol page > The elements of a protocol > Testing > Events and actions > Setting up an event > Event trigger wizard : Number of occurrences in a specific time

Event trigger wizard : Number of occurrences in a specific time

In this step, you should specify the number of times that the situation you chose in the previous step has to occur, and within what time limit. For example, if the situation is that a key must be pressed, then you could specify that it must be pressed three times within 30 seconds.

You should specify the number of times the situation should occur by entering a number from 1 - 230; for the time limit, you can use any of the units d (days), h (hours), min (minutes), or s (seconds). You can mix units and also specify decimal values. So, for example, the period of eight and a half minutes could be entered as '8.5min' or as '8min 30s'. If you don't specify any units, then seconds will be assumed.

You can enter any value from 1 second to 99999 seconds (approx. 28 hours).

ANY-maze help topic T0428