ANY-maze Help > The ANY-maze reference > The Protocol page > The elements of a protocol > Inputs and outputs > Analogue outputs > Setting up an analogue output

Setting up an analogue output

Introduction

For a general introduction to analogue outputs, see An introduction to analogue outputs.

To add an analogue output to a protocol, click the Add item button in the ribbon bar and select New output item > New analogue output from the menu which appears.

The New output item menu option is only included if the protocol mode includes input/output.
The New analogue output option will be disabled until the protocol includes at least one apparatus element.

What you need to do

Each of the steps below is a link, which you can click for more information.

 1.Enter the analogue output's name 
 2.Specify how the output will be set 
 3.If the output is set based on the animal's position, then specify what the output is set relative to 
 4.Specify whether the physical port used by the analogue output is always the same, or whether it depends on the location of a movable zone 
 5.Specify the physical port used by the analogue output  

See also:

 •Adding elements to a protocol 
 •Editing an analogue output 
 •Deleting an analogue output 

© Copyright 2003-2026 Stoelting Co. All rights reserved

ANY-maze help topic T0269