ANY-maze Help > The ANY-maze reference > The Protocol page > The elements of a protocol > Inputs and outputs > Shockers > Setting up a shocker

Setting up a shocker

Introduction

For a general introduction to shockers, see An introduction to shockers.

To add a shocker to a protocol, click the Add item button in the ribbon bar and select New output item > New shocker from the menu which appears.

The New output item menu option is only included if the protocol mode includes input/output.
The New shocker option will be disabled until the protocol includes at least one apparatus element.

What you need to do

Each of the steps below is a link, which you can click for more information.

 1.Enter the shocker's name 
 2.Specify the default duration that a shock should last 
 3.Specify the default intensity (current) of the shock 
 4.Specify the absolute maximum shock duration and intensity 
 5.Specify whether the physical port used by the shocker is always the same, or whether it depends on the location of a movable zone 
 6.Specify the shocker's input/output port  

See also:

 •Adding elements to a protocol 
 •Editing a shocker 
 •Deleting a shocker 

© Copyright 2003-2026 Stoelting Co. All rights reserved

ANY-maze help topic T0220