ANY-maze Help > The ANY-maze reference > The Protocol page > The elements of a protocol > Inputs and outputs > On/off outputs > Setting up an on/off output

Setting up an on/off output

Introduction

For a general introduction to on/off outputs, see An introduction to on/off outputs.

To add an on/off output to a protocol, click the Add item button in the ribbon bar and select New output item > New on/off output from the menu which appears.

The New on/off output menu option is only included if the protocol mode includes input/output.
The New on/off output option will be disabled until the protocol includes at least one apparatus element.

What you need to do

Each of the steps below is a link, which you can click for more information.

 1.Enter the on/off output's name. 
 2.Specify the effect of activating the output. 
 3.Set the output activation options 
 4.Specify whether the physical port used by the output is always the same, or whether it depends on the location of a movable zone. 
 5.Specify the physical port (or ports) used by the output.  

See also:

 •Adding elements to a protocol 
 •Editing an on/off output 
 •Deleting an on/off output 

© Copyright 2003-2026 Stoelting Co. All rights reserved

ANY-maze help topic T0191