ANY-maze Help > I/O devices supported by ANY-maze > Other I/O devices supported by ANY-maze > The RTV-24 I/O ports > Configuring the RTV-24 inputs and outputs

Configuring the RTV-24 inputs and outputs

Configuring inputs

By default, ANY-maze will consider the inputs of an RTV-24 to be active low. You can use the configuration options to alter this logic, such that an input is considered to be active high instead.

Configuring outputs

RTV-24 TTL level outputs are, by default, active high, but you can use the configuration options to change this so that they're active low.

If you connect an RTV-I4 isolated I/O board to your RTV-24, then changing the output configuration will allow you to choose whether the relays should be Normally open or Normally closed.

See also:

© Copyright 2003-2026 Stoelting Co. All rights reserved

ANY-maze help topic T1289