ANY-maze Help > I/O devices supported by ANY-maze > Other I/O devices supported by ANY-maze > The RTV-24 I/O ports
The RTV-24 I/O ports
Introduction
The RTV-24 digitizer includes 4 TTL level inputs and 4 outputs. To actually use these ports, you will need to connect the 'GPIO bracket' supplied with the device - you'll find full details in the manual.
As well as TTL level inputs and outputs, the RTV-24 can be connected to an optional RTV-I4 isolation board which converts the TTL inputs and outputs into opto-coupled (isolated) inputs and relay outputs.
| • | Configuring the RTV-24 inputs and outputs |
| • | Using RTV-24 TTL level inputs |
| • | Using RTV-I4 isolated inputs |
| • | Using RTV-24 TTL level outputs |
| • | Using RTV-I4 isolated outputs |
© Copyright 2003-2026 Stoelting Co. All rights reserved
ANY-maze help topic T1288