ANY-maze Help > I/O devices supported by ANY-maze > Other I/O devices supported by ANY-maze > Syringe pumps > The Stoelting QSI pump

The Stoelting QSI pump

Introduction

The Stoelting QSI pump can deliver infusion or withdrawal volumes as small as 1 picolitre, with flow rates from 0.05µl/min to 520µl/min. The pump includes a computer interface which allows it to be controlled directly from ANY-maze.

Details

Full details of this pump can be found on the Stoelting web site here.

There are no settings required to use the pump with ANY-maze; you just need to connect it to your PC (usually via a USB to serial port adaptor), tell ANY-maze where the pump is connected, and you're done. These steps are described in detail in the Using syringe pumps with ANY-maze topic. This same topic also goes on to describe how you can then use ANY-maze to control the pump.

See also:

© Copyright 2003-2026 Stoelting Co. All rights reserved

ANY-maze help topic T1283