ANY-maze Help > The ANY-maze reference > The Protocol page > The elements of a protocol > Inputs and outputs > Speakers > Setting up a speaker

Setting up a speaker

Introduction

For a general introduction to speakers, see An introduction to speakers.

To add a speaker to a protocol, click the Add item button in the ribbon bar and select New output item > New speaker from the menu which appears.

The New output item menu option is only included if the protocol mode includes input/output.
The New speaker option will be disabled until the protocol includes at least one apparatus element.

What you need to do

Each of the steps below is a link, which you can click for more information.

 1.Enter the speaker's name 
 2.Specify what sound the speaker should play 
 3.Specify the volume of the sound 
 4.Specify how long the sound should play for 
 5.Specify whether the speaker should start playing at the start of the test 
 6.Specify whether the speaker should be reset at the end of the test 
 7.Specify whether the physical port used by the speaker is always the same or whether it depends on the location of a movable zone 
 8.Specify the physical port used by the speaker  

See also:

 •Adding elements to a protocol 
 •Editing a speaker 
 •Deleting a speaker 

© Copyright 2003-2026 Stoelting Co. All rights reserved

ANY-maze help topic T0203