ANY-maze Help > The ANY-maze reference > The Protocol page > The elements of a protocol > Analysis > Analysis across time > Setting up a Time period > Specifying the start and end of a 'fixed' time period

Specifying the start and end of a 'fixed' time period

In brief

For a 'fixed' time period, i.e. one which always covers the same period in all tests, you should simply check the button labelled This period is the same in all stages and then enter the start and end times in the field provided.

Details

You can enter the time using units of s, min, h and d for seconds, minutes, hours and days respectively. You can also mix units and use decimals, so for example, '90s', '1min 30s' and '1.5min' all specify the same time. Note however that the resolution is 1s, so even though you can enter a time such as 23.5s, this will simply be considered to be 23s.

Limits

You can enter any times from 0 to 7 days, although the start time must be before the end time.

As mentioned above, the resolution of the time is 1s.

ANY-maze help topic T0645