ANY-maze Help > I/O devices supported by ANY-maze > Legacy I/O devices > The AMi2 Remote control

The AMi2 Remote control

Introduction

The AMi2 Remote control is designed to provide a simple and practical way to remotely start tests. It consists of two parts: a receiver, which connects to a USB port on your computer, and the remote control itself, which has two buttons and works through walls and at distances of 10 to 50 metres.

Figure 1. The AMi2 Remote control.

Full details about the AMi2 Remote control can be found in the following topics:

•

Setting up and testing the AMi2 Remote control

•

Using the AMi2 Remote control in tests

•

Changing the battery in an AMi2 Remote control

ANY-maze help topic T1128