ANY-maze Help > The ANY-maze reference > The Protocol page > The elements of a protocol > Inputs and outputs > Syringe pumps > Setting up a syringe pump > Setting a syringe pump's flow rate

Setting a syringe pump's flow rate

In brief

You should use the Flow rate field on the syringe pump's settings page to specify the default flow rate for the pump. You need to enter the rate and select the units from the drop-down list to the right of the field. Note that the flow rate can be changed during a test using a procedure.

Details

If you select a flow rate which is beyond the capabilities of the pump you are using, ANY-maze will warn you and you will have to change your entry.

ANY-maze help topic T0260