ANY-maze Help > The ANY-maze reference > The Protocol page > The elements of a protocol > Inputs and outputs > Syringe pumps > Setting up a syringe pump

Setting up a syringe pump

Introduction

For a general introduction to syringe pumps, see An introduction to syringe pumps.

To add a syringe pump to a protocol, click the Add item button in the ribbon bar and select New output item > New syringe pump from the menu which appears.

The New output item menu option is only included if the protocol mode includes input/output.
The New syringe pump option will be disabled until the protocol includes at least one apparatus element.

What you need to do

Each of the steps below is a link, which you can click for more information.

 1.Enter the syringe pump's name 
 2.Specify the syringe you will be using in the pump 
 3.Specify whether the pump should infuse or withdraw 
 4.Specify the flow rate 
 5.Optionally specify the target volume 
 6.Choose whether the pump should start when the test starts 
 7.Specify the syringe pump's input/output port  

See also:

 •Adding elements to a protocol 
 •Editing a syringe pump 
 •Deleting a syringe pump 

© Copyright 2003-2026 Stoelting Co. All rights reserved

ANY-maze help topic T0256