ANY-maze Help > I/O devices supported by ANY-maze > Legacy I/O devices > The ANY-maze interface (AMi) > Installing and configuring AMi > Configuring AMi > AMi configuration - Sensors

AMi configuration - Sensors

To access the AMi configuration window, select your AMi device in the list on the left side of the I/O page and then click the button to Configure this device in the ribbon bar.

Introduction

AMi can be connected to a number of sensors, for example a temperature sensor or a light sensor. However, if you don't have any sensors then clearly you're not going to be using this feature and you can disable the sensor ports.

Details

Disabling the AMi sensor ports frees up resources within the AMi device, and can be useful if you want AMi to do a lot of things simultaneously - for example, if you are using all the analogue inputs and all the speakers simultaneously.

Changes to the state of the sensors only actually take effect the next time AMi or ANY-maze is restarted, so after disabling or enabling the sensors you should either restart ANY-maze or unplug and re-plug your AMi.

ANY-maze help topic T1159