|
ANY-maze Help > The ANY-maze reference > The Tests page > The Experiment management reports > The Test technical details report
The Test technical details report
Introduction
The Test technical details report lists a variety of technical information about a particular test and the tracking that ANY-maze performed in it.
To access the report you should:
| | • | Switch to the Test page. | |
| | • | In the Test schedule report, shown on the left of the page, click the Test number of the test you're interested in. | |
| | • | Select the Test technical report from the menu which appears. | |
Details
| Test date, time & user | Shows the date and time at which the test STARTED and the user who was logged on to ANY-maze during the test. |
| Apparatus details | Shows the name of the apparatus used in the test, the name of the video source which provides images for the apparatus, the name of the interface, camera or video file which supplied the images, as well as details of the physical digitizer board or camera that the interface represents. |
| Image processing details | Reports the number of frames that ANY-maze processed during the test - this depends on the frame rate of the device and the speed of your computer. For example, with multiple cameras operating at a high frame rate (30 frames per second) a slow computer might 'drop frames' and may only process perhaps 15 frames per second. Also shows the number of frames successfully tracked - this is the number of processed frames in which ANY-maze successfully identified the animal. In images with lots of reflections and or noise this value may be substantially less than the number of frames processed. |
| Recording details | Reports the period for which ANY-maze recorded results (i.e. the test duration) and the number of frames that were actually recorded for analysis in the test's results. This number may be less than the number of frames successfully tracked as frames are recorded at a maximum frequency specified in the protocol's tracking options. For example, if ANY-maze tracks in 15 frames per second but the recording frequency is set to just 8 frames per second then only half the frames in which the animal is tracked will actually be recorded. |
See also:
© Copyright 2003-2026 Stoelting Co. All rights reserved
ANY-maze help topic T0780
|
Related reports button in the ribbon bar.